FunkedOut
03-22-2008, 04:28 PM
twice now, i've checked on my duo charging a pair of 7.4V 8000mAh's when i expected them to be at 100% capacity (TCS). sure enough, they were both at 100% in sync mode and the sound was not playing.
i stop the charge, start it again and both times, it immediately sounds.
why is my duo not sounding at 100%?
and i see that anything above 60%, finish is not an option only sound. does this allow the duo to continue to charge? will they overcharge if i let them sit at 100% to see if it will sound eventually?
edit: also, the duo always shows around 4000mAh as the capacity that each pack has been charged with. sounds low but i am setting my lvc for 3.3V per cell.
i stop the charge, start it again and both times, it immediately sounds.
why is my duo not sounding at 100%?
and i see that anything above 60%, finish is not an option only sound. does this allow the duo to continue to charge? will they overcharge if i let them sit at 100% to see if it will sound eventually?
edit: also, the duo always shows around 4000mAh as the capacity that each pack has been charged with. sounds low but i am setting my lvc for 3.3V per cell.