Wrathchild
09-30-2008, 05:49 AM
I have an EOS5i I bought from Maxmaps about a year ago, and it has served me well. Recently however I bought an E-Flite Blade CX2 and a few extra 800mah 2s packs for it. The included charger works, but it's very slow (2-2.5 hours) and without a voltage readout I can't tell how well the cells are balanced.
I know some chargers will support charging through the balance plug for low voltages, and since I would only be charging at 800mah at most, I'd like to go that route. I could change out all the plugs but being able to charge through the balance taps would be much easier.
I am using the LBA10 in conjunction with this, and it seems to detect the battery fine and indicates a cell discharge when connected in stand alone mode. However whenever I try to initiate the charging from the EOS5i I get the error of no battery connected.
Does this charger and balancer combination support charging through the balance tap line?
I know some chargers will support charging through the balance plug for low voltages, and since I would only be charging at 800mah at most, I'd like to go that route. I could change out all the plugs but being able to charge through the balance taps would be much easier.
I am using the LBA10 in conjunction with this, and it seems to detect the battery fine and indicates a cell discharge when connected in stand alone mode. However whenever I try to initiate the charging from the EOS5i I get the error of no battery connected.
Does this charger and balancer combination support charging through the balance tap line?