Transmitter pack for Spektrum DX2.0

[kulangflow]

Can any of you recommend which MaxAmps lipo pack will work/fit for a Spektrum DX2.0?

[Tim Smith]

Hi kulangflow, Welcome to the boards.


Sorry but I don't have that radio so I am unsure the the exact dimensions on your battery area, but Here is a link (http://www.maxamps.com/products.php?cat=66) to a list of transmitter packs that just might fit.


Hope that helps.


Cheers Tim Smith

[The Hidden Hangar]

THE 2500 brick will fit you will have to hard wire the connection though, was hoping they were like the xs3 pro where there a jr type plug under the battery holder but there not

[admin]

The easiest way to do this is to order the TX Li-Po with the Futaba/Hitec type servo connector on it and then also order the opposite end. You can then solder that mating lead into the existing wires going to the 9 volt battery terminals they use. In doing this you can still use the original battery holder and Nimh cells if you need to go back or if you sold the TX but not your Li-Po pack.

Admin