FishMaxx's 2.2 OCM/Berg Crawler

[John Mesa (FishMaxx)]

Just got the NEW version of the OCM/New Age/EnRoute Berg chasssis.

It seems to be the same basic as the others posted so far, but with a diffrent box and finish on the parts.

This one has a silver textured finish





Round one

EnRoute Berg 2.2 Axles
Aluminum GC2 Chassis
RC4WD Wheels (Clod offset) 10 3/4 Track Width:shock:
Losi Claws with Ace Donuts Front, Losi foam in rear
Recycled HPI Bug body
2x 35 turn Lathe motors
2100 mah MaxAmp's 3s Lipo
Shock Shocks
Losi Yellow Springs
Traxxas Progressive Springs
Dual Tekin FXR ESC's
Nomadio React Radio
Castle BEC
Hitec 5995 Servo

[John Mesa (FishMaxx)]

MaxAmps 2100 3s Lipo fits perfectly in the GC2's belly
http://www.maxamps.com/Lipo-2100-111-Pack.htm



2x Tekin FXR ESC-Nomadio V2 receiver-Castle BEC


The electronics assembly fits nicly as well on top of the battery.

[John Mesa (FishMaxx)]

Also made some new bent allthread-stainless lower links for the front and rear lowers.

[Jason Maxamps.com]

Ok you've got my attention! Is there a US supplier for these? I found the Euro Site. What was the price shipped if you got your from overseas? Also what's your thoughts of it with the GC2?

Jason

[John Mesa (FishMaxx)]

Ok you've got my attention! Is there a US supplier for these? I found the Euro Site. What was the price shipped if you got your from overseas?

No need to go overseas! Lots of vendors sell them in the US. However most places that have them currently on backorder:mad:

The Crawler Store sells the axles only for $240.00
https://www.tcscrawlers.com/Backorde...h-p-16926.html


and the kit for $349.00
https://www.tcscrawlers.com/images/P/bergFrontBig.jpg

Also what's your thoughts of it with the GC2?

I figured it was good enough for Austin to win ECC08, so it should be good enough for me to start with as a baseline How ever since the GC2 was designed for shaft driven AX10's there are a few things that could be approved upon. One is the lack of upper link mounting hole options

Notice the extender plate I added.

[Jason Maxamps.com]

Cool thanks for the info. I may have to look into a set of the axles for my next cralwer. I'm loving the Axial based GC2 right now.

Jason

[Steven Kautz (SVEN)]

Jason you won't be disappointed in the Berg axles. The all metal construction makes them beefy.

[rbgerrish]

What's your center clearance Fish? Great rig!!

[John Mesa (FishMaxx)]

[Sprint 80]

How do you like the OTA steering? Does it give you the same turning radius as the conventional sttering?

Thanks!
Alan

[John Mesa (FishMaxx)]

I have not done any turn testing, but it goes lock to lock. I assume steering is the same.

[John Mesa (FishMaxx)]

A few updates...

The GC2 worked awesome, but switched over to a Kamikazi Kustom's Zero because it had more shock and upper link holes because it didn't need to accommodate a tranny.

The body is one of the new J Concepts bodies. Its more roll-over friendly than alot of the other choice out there


Buford Dam: Atlanta GA

[John Mesa (FishMaxx)]

MOAB: 2008 Nationals



Check out the controller!




SUPER !

[Jason Gainey (H3RESQ)]

Great truck's. I really enjoyed watching them work at National's.

I loved the chrome plated DNA wheel's too!!!!